24/7 Emergency Service Mon-Fri 8am-6pm · Sat 9am-4pm
Plumbing · Guide

PEX Repipe Guide: The Cure for Poly-B Pipes in Vancouver Homes

Published September 26, 2026 28 min read By BC Home Service Team

Poly-B pipes fail and insurers know it. This Vancouver PEX repipe guide covers costs, PEX-A vs B vs C, the 1-3 day process and insurance savings.

Part 1

How much a PEX repipe costs in Vancouver

Here is the short answer first, followed by the detail — the same explanation our technicians give homeowners across Metro Vancouver.

A typical 2-bathroom Metro Vancouver home repipes for $6,500–$9,500 with PEX-A; a 3-bath home runs $8,500–$12,000; condos start around $4,500 and large 4+ bath homes reach $13,000–$18,000. Every quote includes all hot and cold lines, new brass shut-offs and supply lines at every fixture, patching, permit and the 25-year warranty. Wall access, storeys and fixture count are the price drivers — never square footage guesses.

Part 2

How long a whole-house repipe takes

The direct answer below is the one our crews walk through on service calls throughout Metro Vancouver.

Most homes are complete in 1–3 working days, with water off only in roughly 8am–4pm blocks and back on every evening. Two-storey homes with finished basements or suites run 3–5 days.

Patching and sanding happen inside the same window, so the house is paint-ready when we leave. Strata and multi-unit buildings are phased so residents keep overnight water throughout.

Part 3

Do I have to replace poly-B if it has never leaked

Straight to the point: this is how we answer the question for BC homeowners, in plain language.

Nobody can force you — but in 2026 the practical answer is yes. Every poly-B system installed between 1978 and 1995 is now 30+ years into a chlorine-degradation process with no reliable remaining-life prediction, insurers are refusing coverage or surcharging the material, and the failure mode is sudden and inside walls.

A clean history tells you the coin has landed well so far, not that the coin stopped flipping. Planned replacement on your schedule always beats emergency replacement on the ceiling's schedule.

Part 4

Will my insurance really get cheaper after a repipe

The honest answer is below, including what it means for the decision you are making.

In most cases, yes — we routinely see premiums drop 10–20% relative to poly-B-surcharged rates, water-damage exclusions removed, and non-renewal threats withdrawn once underwriters receive our documentation package (scope of work, materials list, warranty, install photos). The exact outcome depends on your insurer and policy wording, so send the package to your broker — but the risk marker they are pricing disappears the day we pressure-test the new system.

Part 5

Is PEX-A actually better than copper for repiping

Here is the answer as we give it on the phone — no fine print, no jargon.

For inside-wall repiping, PEX-A with expansion fittings is the better engineering and value choice: fewer hidden joints, full-bore flow, kink-repairable flexibility, superior long-cycle joint reliability, and 40–60% lower cost than full copper. Copper still earns its place for exposed, structural and heritage-visible runs, and we quote it transparently where it fits. Insurers and inspectors treat professional PEX-A and copper repipes as equivalent — what matters to them is the poly-B leaving.

Part 6

What gets replaced in a full repipe — and what stays

The quick version first, then the full explanation Metro Vancouver homeowners actually need.

Everything that carries water under pressure gets replaced: all hot and cold supply lines, the manifold, every fixture shut-off valve, all braided supply lines, hose bibs and water heater connections. Fixtures themselves (toilets, sinks, faucets) stay and get reconnected with new hardware.

Old poly-B inside finished walls is abandoned in place — standard practice, since removing every metre would mean opening every wall — while all accessible pipe is removed. Drain lines are separate (ABS/cast) and unaffected unless separately failing.

Quick answers

Frequently Asked Questions

A typical 2-bathroom Metro Vancouver home repipes for $6,500–$9,500 with PEX-A; a 3-bath home runs $8,500–$12,000; condos start around $4,500 and large 4+ bath homes reach $13,000–$18,000. Every quote includes all hot and cold lines, new brass shut-offs and supply lines at every fixture, patching, permit and the 25-year warranty. Wall access, storeys and fixture count are the price drivers — never square footage guesses.
Most homes are complete in 1–3 working days, with water off only in roughly 8am–4pm blocks and back on every evening. Two-storey homes with finished basements or suites run 3–5 days. Patching and sanding happen inside the same window, so the house is paint-ready when we leave. Strata and multi-unit buildings are phased so residents keep overnight water throughout.
Nobody can force you — but in 2026 the practical answer is yes. Every poly-B system installed between 1978 and 1995 is now 30+ years into a chlorine-degradation process with no reliable remaining-life prediction, insurers are refusing coverage or surcharging the material, and the failure mode is sudden and inside walls. A clean history tells you the coin has landed well so far, not that the coin stopped flipping. Planned replacement on your schedule always beats emergency replacement on the ceiling's schedule.
In most cases, yes — we routinely see premiums drop 10–20% relative to poly-B-surcharged rates, water-damage exclusions removed, and non-renewal threats withdrawn once underwriters receive our documentation package (scope of work, materials list, warranty, install photos). The exact outcome depends on your insurer and policy wording, so send the package to your broker — but the risk marker they are pricing disappears the day we pressure-test the new system.
For inside-wall repiping, PEX-A with expansion fittings is the better engineering and value choice: fewer hidden joints, full-bore flow, kink-repairable flexibility, superior long-cycle joint reliability, and 40–60% lower cost than full copper. Copper still earns its place for exposed, structural and heritage-visible runs, and we quote it transparently where it fits. Insurers and inspectors treat professional PEX-A and copper repipes as equivalent — what matters to them is the poly-B leaving.
Everything that carries water under pressure gets replaced: all hot and cold supply lines, the manifold, every fixture shut-off valve, all braided supply lines, hose bibs and water heater connections. Fixtures themselves (toilets, sinks, faucets) stay and get reconnected with new hardware. Old poly-B inside finished walls is abandoned in place — standard practice, since removing every metre would mean opening every wall — while all accessible pipe is removed. Drain lines are separate (ABS/cast) and unaffected unless separately failing.

Talk to a Real BC Technician About This

Our dispatch line answers 24/7 across Metro Vancouver, diagnostics start at $89, and every quote is flat-rate and written before any work starts.

Flat-rate quotes in writing · 24/7 live dispatch · Metro Vancouver

Popular Locations
PlumbingVancouver·Surrey·Burnaby·Richmond·Coquitlam·Langley·Delta
Heating / FurnaceVancouver·Surrey·Burnaby·Richmond·Coquitlam·Langley·Delta
Cooling / ACVancouver·Surrey·Burnaby·Richmond·Coquitlam·Langley·Delta
Heat PumpsVancouver·Surrey·Burnaby·Richmond·Coquitlam·Langley·Delta
BoilersVancouver·Surrey·Burnaby·Richmond·Coquitlam·Langley·Delta
Water HeatersVancouver·Surrey·Burnaby·Richmond·Coquitlam·Langley·Delta
Windows & DoorsVancouver·Surrey·Burnaby·Richmond·Coquitlam·Langley·Delta
24/7 EmergencyVancouver·Surrey·Burnaby·Richmond·Coquitlam·Langley·Delta
Call Now Free Quote