24/7 Emergency Service Mon-Fri 8am-6pm · Sat 9am-4pm
Warranty Guide · Heat Pumps · BC · 2026

Heat Pump Warranties: What Is Covered and What Voids Them

Published April 25, 2026 13 min read By BC Home Service Team

A heat pump warranty is four promises stacked on top of each other: parts from the manufacturer, the compressor headline term, labour from your installer, and workmanship from the crew that did the brazing. This guide separates them, covers registration and the paperwork that wins claims, lists what actually voids coverage and what never does, and plays a real claim forward from error code to repaired system, including what happens to your warranty when the house sells.

Heat pump outdoor unit and installation documents on a British Columbia home
The machine carries a decade of manufacturer coverage. The folder, registration, invoices, commissioning report, is what makes it real on the day something fails.
Chapter 1

The Honest Answer Up Front

Heat pump warranties look generous on paper, and mostly are: parts coverage commonly runs five to ten years, the compressor, the heart of the machine, is commonly covered for ten to twelve, and the cold-climate equipment we install carries some of the longest terms in the industry. The honest asterisk is that the failures heat pumps actually suffer in their first decade are dominated by the things parts warranties were never designed to pay for: the labour to diagnose, the refrigerant handling, the motor swaps and control-board changes whose parts are covered but whose hands are not. The warranty you will actually experience is a stack of four layers, and the two layers that decide most real outcomes are the ones attached to your installer rather than your manufacturer.

That is why this guide spends its first half on the stack itself, what each layer covers, what registration actually requires, what voids coverage and what does not, and its second half on the practical machinery: the records that win claims, the claim process played forward, the warranty math worth doing at purchase time, and what happens to coverage when you sell the house. Our own position in the stack is stated plainly wherever it matters: a 2-year workmanship warranty, Red Seal installers under BC licence BC-PL-2019-4421, $2M liability coverage, and warranty registrations we file for you. The heat pump installation page covers the equipment decision; this guide is the fine-print chapter of it.

The warranty you get is not the one printed on the brochure. It is the one someone bothered to register, document and stand behind, and those are installer behaviours before they are manufacturer terms.

0 jobs since 2010

Enough warranty claims filed and honoured to know exactly which layer pays for which failure.

0 parts warranties we register

Manufacturer registrations filed for you at commissioning, confirmation copies in your handover folder.

0 star rated

26 verified Google reviews, including the households whose claims we handled start to finish.

0 on workmanship

Our layer of the stack: brazing, mounts, electrical terminations and commissioning, covered for two years.

Chapter 2

The Four Layers of Coverage

A heat pump warranty is not one promise, it is four, and misreading which layer answers which failure is where most homeowner disappointment begins. The manufacturer backs two of them, the installer backs the other two, and the boundaries between them are stable across the major brands even when the exact terms differ.

LayerWho backs itTypical spanWhat it pays for
Parts warrantyThe manufacturer5-10 years, commonly longer on the cold-climate classFactory defects in covered components: coils, boards, motors, valves
Compressor warrantyThe manufacturer10-12 years, the headline numberThe sealed compressor itself, the most expensive single part in the machine
Labour warrantyThe installing contractorCommonly 1-2 yearsThe hands: diagnosis, recovery, swap-in and verification labour on warranty parts
Workmanship warrantyThe installing contractorOurs: 2 yearsThe install itself: brazing quality, mounts, electrical terminations, commissioning

The layer boundaries produce the sentence that surprises the most homeowners: a covered part with expired labour coverage still costs money to replace. A control board that fails in year six can be free as a part and billable as an afternoon of diagnosis and installation, and the honest way to plan for that is to know which years each layer spans and to choose an installer whose labour and workmanship terms are written, not implied. The spans above are typical patterns across the market rather than promises about your specific model, which is why the exact terms, and the registration conditions attached to them, come from the equipment documentation we review with you before you sign.

The manufacturer layers

Parts and compressor coverage against factory defects, longest on the cold-climate class, conditional on registration.

The installer layers

Labour and workmanship, the layers that decide how a warranty feels in years one through three. Ours: 2 years, in writing.

The registration gate

The long manufacturer terms are commonly conditional on registering the install within a short window. We file it, you keep the proof.

The who-answers-the-phone layer

In year six, the manufacturer ships parts to whoever you call. Choose the contractor who picks up.

Chapter 3

Registration, Deadlines and Proof

The longest warranty terms in the industry are, on most major brands, conditional: the unit must be registered to its installing address within a window, commonly 60 to 90 days of the install date, or the coverage falls back to a shorter base term. The registration exists so the manufacturer can tie serial numbers to install dates and documentation, and it is the single most commonly missed step in the entire warranty stack, because the paperwork arrives with the commissioning documents, at the exact moment a homeowner is busy learning their new thermostat and throwing away cardboard.

Our answer to that failure mode is to remove the step: registrations are filed for you at commissioning, as part of the handover, and the confirmation, model numbers, serial numbers, install date and registration reference, goes into the folder we leave with you. The proof matters years later, when a service call needs the install date verified or a claim needs the registration attached, and "the installer said they filed it" is not a document. Hold the confirmation, hold the commissioning report, hold the invoices, and your warranty has an evidence trail the way a title has a deed.

1

At install: the handover folder

Commissioning report, registration confirmation, model and serial numbers, warranty terms sheet, and our flat-rate invoice, in one folder, yours.

2

Within the window: verification

If a brand confirms registrations by email or portal, we forward it and file it. No one has to remember a 60-day clock.

3

Every visit: the paper grows

Each service invoice carries model, serial, date and findings, which is exactly the documentation manufacturers request on sealed-system claims.

4

At sale: the folder transfers

Remaining coverage follows the equipment, and the records folder is what makes it real for the next owner.

Chapter 4

What Is Actually Covered

Inside its term, the parts layer covers factory defects in the sealed system and the functional components: the compressor, the coils, the reversing valve, expansion devices, control boards, and the fan motors. The compressor layer is the headline, not because compressors fail often in the first decade here, they do not, but because it is the single component whose replacement bill would otherwise resemble a down payment. What the coverage means in practice is the part ships free and the claim pays out against the defect, not against every symptom a heat pump can produce.

Two honest notes belong on this page. First, some brands structure parts coverage on a declining basis in the later years, a smaller share of the part cost as the unit ages, so the terms sheet matters more than the headline span. Second, coverage follows defects, and defects are established by diagnosis, which is why the process in Chapter 8 begins with a proper diagnostic visit rather than a guess. The strongest thing you can do for a future claim is keep a paper trail that makes the defect easy to establish, which is the entire subject of Chapter 7. For the equipment context around these terms, the Vancouver heat pump guide covers the classes and costs these warranties attach to.

Chapter 5

What Is Not Covered

The exclusions list is where warranty expectations go to die, so here it is stated plainly, with the entry that surprises most households first: labour past its term is not covered even when the part is, which is how a "free" board or motor still lands as a $180-$450 repair bill for the diagnostic and swap. That is not a trick, it is the two-layer structure from Chapter 2 doing exactly what it says.

Not coveredWhy it is excludedWhat it means for you
Labour past the labour termParts coverage pays for parts; hands are the installer’s layerA covered part can still mean a $180-$450 repair visit in year six
Refrigerant, in many scenariosTreated as a consumable when losses trace to damage or neglect rather than defectA sealed-system leak repair carries the gas cost, which is why leaks get fixed, not topped up
Filters and consumablesWear items by definitionNo cost, on your schedule, forever
Cosmetic wear, corrosion finishesAppearance items age by environmentOur coastal rain and air quality make this permanent
Storm, surge and flood damageEnvironmental events sit outside defect coverageInsurance territory, and a reason surge protection is cheap
Rodent and pest damageChewed wiring and lines are exclusion classics in BCKeep the intake area clear, and look twice in autumn
Damage from missed maintenanceWarranty requires the unit to be cared forDocumented annual visits are claim currency, not upsell

The refrigerant row deserves its own sentence, because it connects to the biggest honesty test in this trade: a unit that is "a bit low" every year is not a consumable situation, it is a leak, and topping it up repeatedly masks a repairable defect while quietly voiding the claim you will eventually need. The right move is a leak search and a fix, and the refrigerant regulations in this province make unlicensed handling of the sealed system illegal anyway, which is the next chapter's subject.

Chapter 6

What Voids a Warranty, and What Does Not

This is the chapter people actually search for, and the honest version has two columns, because the fear list in homeowners' heads is longer than the real one. The genuine voids are almost all variations on the same theme: unauthorized hands, undocumented conditions, altered safeties.

This CAN void coverageThis does NOT void coverage
DIY work on the sealed system, refrigerant includedChanging your own filters, on schedule, forever
Unlicensed refrigerant handling, which is also illegalGently rinsing the outdoor coil with a garden hose
Top-up after top-up instead of leak repairUsing any licensed contractor for your annual service, ours or another
Non-permitted electrical modifications to the circuitReplacing a thermostat yourself, per the equipment documentation
Altered safeties, controls or lockoutsKeeping snow and debris clear of the outdoor unit
Missed maintenance with no records, where terms require themPhotographing an error code and calling us the same day
An install that was never registeredSelling the house, with the records folder passed along

The sealed-system rows carry the weight in BC, because refrigerant work is legally restricted to certified technicians, so a do-it-yourself repair on the refrigerant circuit risks your warranty and the law in the same afternoon. The pattern across our service calls, from Langley heat pump service calls to the coast, is consistent: voided claims are rare, and nearly all of the rare ones trace to an unauthorized repair or a paper trail that never existed. Keep the two columns straight and you will never meet one.

Chapter 7

Records as Claim Currency

Manufacturers processing a sealed-system claim ask for evidence: install date, registration, model and serial, and maintenance history. They are entitled to ask, and the households that answer in one email are the households whose claims move. The evidence is not exotic. It is a folder, paper or digital, containing five document types, and it is the difference between a claim that resolves in days and one that stalls in requests for more proof.

The documentWhat it provesWhen it is asked for
Registration confirmationThe install was registered in the window, unlocking the long termsAny claim, always
Commissioning reportProfessional install, verified operation, settings recordedWorkmanship disputes, early-life claims
Flat-rate invoices, every visitMaintenance history and findings over the yearsClaims where terms require documented care
Model and serial recordWhich unit, which factory batch, which warranty terms applyEvery claim, always
Photographed error codesThe failure as the equipment itself reported itIntermittent faults and control claims

Our invoices are built to serve exactly that list: model, serial, date, findings and work performed on every document, so a claim file assembles itself from the folder you already have. The annual inspection visit is where that paper accrues, filter, coil, refrigerant and electrical verification each year, and it is the visit manufacturers mean when their terms mention documented maintenance. If the unit has been serviced by another licensed contractor, those invoices count too, the paper is the point, not the letterhead.

Chapter 8

A Claim, Played Forward

Here is the sequence from symptom to resolution, the way it actually runs, so that a failure in year five holds no mystery. It starts the same way every diagnostic story starts in this trade: with the symptom, not the part.

1

The symptom and the evidence

Photograph the error code, note the conditions, and call 604-615-2212. Intermittent faults live or die on the evidence you captured.

2

The $89 diagnostic

A Red Seal technician establishes what failed and why, and the fee is credited to the repair if you proceed. No part gets ordered on a guess.

3

The warranty determination

Model, serial, install date and registration against the terms, right there at the table: which layer pays, which parts ship free, what labour applies.

4

The claim filed

We assemble the evidence pack from the records folder and file with the manufacturer. Documentation, not persuasion, is what moves a claim.

5

The repair and the report

Part installed, system verified back to commissioning spec, invoice issued for whatever the layers leave, and the folder grows by one document.

The honest timelines: warranty parts ship in days to a few weeks depending on the brand and the part, which is why the diagnostic matters, you want to order the right part once, and why our 24/7 line matters in season, because a January failure with a two-week part lead time is a household problem, not a warranty problem. When a claim is denied, the denial is usually one of three things: coverage expired, the failure class is excluded, or the maintenance documentation does not exist, and two of those three are preventable by the folder. In our experience across Coquitlam heat pump service calls and everywhere else we work, the third reason is the one worth engineering away, because it is the only one that is pure paperwork discipline.

Heat pump outdoor unit on a British Columbia home with service documentation
The machine carries a decade of manufacturer coverage; the folder you keep is what makes that coverage real on the day something fails. Registration, invoices, commissioning report, five documents, one place.
Chapter 9

Warranty Math at Buying Time

When you are comparing equipment, warranty terms are real data, and they are also the easiest place in a quote to compare the wrong thing. Span is the visible number; the terms behind it, registration conditions, declining coverage in later years, what labour is included, are the ones that decide your experience. Two units quoting "10-year parts" can behave differently in year eight for exactly those reasons, which is why we walk the terms sheet line by line rather than headline by headline.

On extended warranties, the honest take: read the exclusions before the price. The plans that look like certainty are often the manufacturer's parts layer extended past the years when covered-class failures are statistically likely, with labour still billable, which for most households in our climate is buying insurance against the least probable decade of the machine's life. The failures that actually dominate early years here, motors, boards, capacitors, wiring and connections, are exactly the failures where the installer's labour and workmanship coverage, and their willingness to answer the phone, do the real work. Ductless systems run $3,800-$5,500 installed, cold-climate ducted systems $6,500-$14,000, and multi-zone builds $9,500-$16,000. Combined CleanBC Better Homes, BC Hydro, FortisBC and municipal top-ups can reach $16,000 for cold-climate heat pumps in 2026 — we complete the paperwork. That rebate documentation belongs in the same handover folder as your warranty registration, and the deciding variables inside those price ranges remain capacity, tier and site work, not the extended warranty checkbox.

The two questions worth asking any bidder, verbatim: who registers my warranty, and what exactly does your own labour and workmanship coverage include in writing. The answers tell you more about year six than any brochure span does.

Chapter 10

Selling the Home With a Warranty

When the house sells, the heat pump sells with it, and remaining coverage generally follows the equipment rather than the owner, with a catch worth knowing in advance: some manufacturers require a transfer registration to move coverage cleanly to the buyer, and a few terms are structured to shorten on transfer. The practical work is the same either way, find the terms sheet, find the registration, file whatever transfer the brand wants, and hand over the folder.

The folder is also the selling feature, and homeowners consistently underrate it. A heat pump with five years of remaining parts coverage, a commissioning report, and invoices showing annual care is a documented, maintained, warrantied system in a listing, versus a machine of unknown history in the same basement. Buyers' inspectors notice the difference, and the energy-efficient upgrades guide is worth a read before listing, because the same documentation discipline that wins warranty claims, receipts, dates, model numbers, also wins the conversation about what your home's upgrades are worth.

The transfer registration

Some brands want it filed on sale, some do not, and one terms sheet answers the question in a minute. We help you read it.

The folder as a listing asset

Registration, commissioning report and service invoices turn "heat pump, age unknown" into "warrantied, documented, maintained."

Coverage terms on transfer

A minority of terms shorten when the home changes hands. Know before you list, not after.

The buyer’s service continuity

The same records that transfer the warranty introduce the new owner to the maintenance rhythm that keeps it valid.

Heat pump outdoor unit installed at a British Columbia home with its service documentation folder
Documented, maintained, warrantied: three words that add real dollars to a listing with a heat pump, and all three live in a folder rather than the machine.
Chapter 11

The One-Page Cheat Sheet

The whole warranty file on one card. If a quote contradicts a line here, the quote needs to explain itself, and 604-615-2212 reaches someone who can.

QuestionThe answer
The four layers?Parts 5-10 yrs, compressor 10-12, labour 1-2, workmanship, ours 2 years, all stated in writing
Who registers it?We do, at commissioning, confirmation in your handover folder. Never an unregistered install
What is covered?Factory defects: compressor, coils, valves, boards, motors, within term and conditions
What is not?Labour past its term, refrigerant on non-defect losses, consumables, storm and pest damage, neglected maintenance
The classic surprise?A free part in year six with a $180-$450 bill for the hands. That is the layer structure, not a trick
What voids it?DIY sealed-system work, unlicensed refrigerant handling, altered safeties, non-permitted electrical, undocumented neglect
What never voids it?Your own filter changes, gentle coil rinsing, snow clearing, licensed service by any contractor
Claim currency?Registration, commissioning report, invoices, model and serial, photographed error codes: one folder
Selling the home?Coverage follows the equipment, some brands want a transfer filed, and the folder is the listing asset
Quick answers

Frequently Asked Questions

Typical market patterns: parts coverage commonly runs 5 to 10 years, the compressor is commonly covered for 10 to 12, labour from the installing contractor runs 1 to 2 years, and workmanship coverage, the install quality itself, is our 2-year term in writing. The longest manufacturer terms are usually conditional on registering the unit to its install address within a short window, commonly 60 to 90 days, or the coverage falls back to a shorter base term. Exact spans and conditions come from the terms sheet of the specific model, which we review with you before you sign, and we file the registration at commissioning with the confirmation in your handover folder.
The genuine voids are almost all unauthorized work or altered conditions: do-it-yourself repairs on the sealed refrigerant system, which is also illegal without certification in Canada, unlicensed refrigerant handling, repeated refrigerant top-ups that mask a leak instead of repairing it, non-permitted electrical modifications to the unit’s circuit, altered safeties, controls or lockouts, and missed maintenance where the terms require documented care. What does NOT void it: changing your own filters, gently rinsing the outdoor coil, keeping snow and debris clear, replacing a thermostat per the equipment documentation, and having any licensed contractor perform your annual service. In our experience voided claims are rare, and they almost always trace to unauthorized sealed-system work or a paper trail that never existed.
Only through the labour layer, which belongs to your installing contractor rather than the manufacturer, commonly 1 to 2 years. Parts coverage can outlast it by a decade, which produces the classic surprise: a control board or fan motor that fails in year six ships free under the parts warranty while the diagnostic and installation labour bill lands at roughly $180-$450. That is the layered structure working exactly as written, not a trick. Our terms state the labour and workmanship position plainly, and any estimate or repair quote should state which layer pays for what before you approve the work.
For sealed-system and major-component claims, many manufacturers ask for evidence that the unit has been cared for, which in practice means documented service history: dates, findings and work performed. The strongest version is an annual inspection visit, filter and coil care plus refrigerant and electrical verification, with an invoice carrying the model, serial and findings. Those documents are also exactly what a claim file wants if a failure ever happens. The visit matters mechanically as well, a fouled coil or a drifting charge is a warranty-adjacent failure waiting for a season to prove it. Keep the invoices in one folder, whichever licensed contractor does the work; the paper is the point, not the letterhead.
Generally yes, remaining coverage follows the equipment rather than the owner, but with two cautions. Some manufacturers require a transfer registration to move coverage cleanly to the buyer, and a minority of terms are structured to shorten on transfer, so read the terms sheet before you list rather than after you accept an offer. The practical asset is the records folder: registration confirmation, commissioning report, model and serial, and the service invoices. A heat pump with five years of remaining documented coverage is a listing feature, and we help owners assemble the transfer paperwork as part of preparing a home for sale.
Written by the BC Home Service Team

Red Seal certified, licensed gas fitters (BC-PL-2019-4421), $2M insured and 15-plus years in the field, with more than 12,000 jobs completed across Metro Vancouver since 2010 and a 5.0-star rating across 26 Google reviews. We wrote this guide because the warranty a household actually gets is decided by paperwork discipline, registration, invoices, commissioning records, and an installer who answers the phone in year six, long before it is decided by the span printed on the brochure. To book instead of DIY, see heat pump repair in Surrey — same-day across the city.

More about our team →
Free Estimate

Get a Warrantied, Paper-Trail Install

Book a $89 diagnostic or a free installation estimate with a Red Seal estimator. You get the exact warranty terms of the proposed models explained layer by layer, the registration and commissioning documentation that makes them real, a fixed written price, and financing options from 7.99 percent with approved credit. Zero obligation, same-day quotes on most calls. If you would rather hand this to a pro, our heat pump services pages cover Metro Vancouver.

Error code on the thermostat?

Photograph it and call. A fault code is the equipment telling you what failed, and a $89 diagnostic, credited to the repair, turns it into an answer before any part gets ordered. We answer 24/7, with a $150 flat after-hours premium posted in advance.

Call 604-615-2212 WhatsApp Us
Licensed gas fitters, Technical Safety BC permitted installs
10-year parts warranties registered for you
Financing from 7.99% with approved credit
24/7 emergency line, average 45-minute response
Call Now Free Quote